Free Journeyman Electrician Practice Test 2024 Online Test + PDF

Last Updated on June 24, 2024

Free Journeyman Electrician Practice Test 2024 Online Test + PDF. Prepare for your Journeyman Electrician exam with our updated 2024 practice test. Try our free review questions and answers to enhance your understanding and test-taking skills.

You can also download a printable PDF and study guide for convenient offline study. Use these resources to ensure you are well-prepared for the Journeyman Electrician exam and increase your chances of success.

Suppose you are an apprentice electrician preparing for the journeyman exam. In that case, you’ve probably spent the last four or more years working under a master electrician and looking forward to getting your own Journeyman Electrician license. You’ve probably been preparing for this moment, waiting for your journeyman electrician exam, and the end is in sight! Now, all that’s left to do is find a way to pass the exam.

Journeyman Electrician Practice Test

Journeyman Electrician Practice Test Online Test
Total Items: 15
Explanation: YES
Free Test, NO registration is Required

1 / 15

Q1. Feeder conductors shall be tapped, without overcurrent protection at the tap if:

(A) The ampacity of the tap conductors is not more than the calculated loads on the circuits supplied by the tap conductors

(B) The ampacity of the tap conductors is not more than the rating of the equipment containing an overcurrent protection device(s) supplied by the tap conductors

(C) The tap conductors do not extend beyond the switchboard, switchgear, panelboard, disconnecting means, or control devices they supply

(D) The voltage between any two ungrounded conductors supplying the tap conductors does not exceed 250-volts to ground

2 / 15

Q2. An incandescent lamp for general use on lighting branch circuits shall not be equipped with a medium base if rating over ___________, or with a mogul base if rated over ____________.

(A) 150 watts, 1000 watts

(B) 300 watts, 1000 watts

(D) 300 watts, 1500 watts

3 / 15

Q3. Type NM, Type NMC, and Type NMS cables shall be permitted to be used in the following, except as prohibited in 334.12:

(A) One- and two-family dwellings and their attached or detached garages, and their storage buildings

(B) Commercial kitchens

(D) Multi-family dwellings permitted to be of Types I and II construction

4 / 15

Q4. Type MC cable that provides an effective ground-fault current path in accordance with one or more of the following can be used as an equipment grounding conductor:

(A) It contains an insulated or uninsulated equipment grounding conductor in compliance with 250.118(1)

(B) The combined metallic sheath and uninsulated equipment grounding/bonding conductor of interlocked metal tape-type MC cable that is listed and identified as an equipment grounding conductor

(C) The metallic sheath or the combined metallic sheath and equipment grounding conductors of the smooth or corrugated tube-type MC cable that is listed and identified as an equipment grounding conductor

(D) All of the above

5 / 15

Q5. Equipment that utilizes electric energy for electronic, electromechanical, chemical, heating, lighting, or similar purposes is the definition of what?

(A) Cord-and-plug equipment

(B) Equipment grounding conductor

(D) Current Carrying Conductor

6 / 15

Q6. What is the minimum clearance parameter for an open overhead 240-volt feeder travelling over a pool, from the surface of the water?

(A) 20.5 feet

(B) 22.5 feet

(D) 16 feet

7 / 15

Q7. For enclosures in wet locations, raceways or cables entering above the level of uninsulated live parts shall use fittings listed for:

(A) Weather-Proof Use

(B) Outdoor use

(D) Wet locations

8 / 15

Q8. The total rating of utilization equipment fastened in place, other than luminaires, shall ________ of the branch-circuit ampere rating where lighting units, cord-and-plug-connected utilization equipment not fastened in place, or both, are also supplied.

(A) Not exceed 50 percent

(B) Not exceed 80 percent

(D) Be rated at 125 percent

9 / 15

Q9. In a separately derived system, a supply-side bonding jumper shall not be required to be larger than:

(A) The derived ungrounded conductors

(B) The grounding electrode conductor

(D) The grounded conductor

10 / 15

Q10. The width of working space in front of electrical equipment shall be the width of the equipment or ______, whichever is greater.

(A) 36 inches

(B) 42 inches

(D) 48 inches

11 / 15

Q11. All electric pool water heaters shall have the heating elements subdivided into loads not exceeding ________, and protected at not over ________.

(A) 50 amperes, 60 amperes

(B) 48 amperes, 60 amperes

(D) 60 amperes, 100 amperes

12 / 15

Q12. An attachment plug is a:

(A) Device designed to open and close a circuit by non-automatic means and to open the circuit automatically on a predetermined overcurrent without damage to itself when properly applied within its rating

(B) Device that, by insertion in a receptacle, establishes a connection between the conductors of the attached flexible cord and the conductors connected permanently to the receptacle

(C) Device that controls ac/dc voltage or ac/dc current, or both, and that is used to charge a battery or other energy storage device

(D) A fitting intended to terminate a cord to a box or similar device and reduce the strain at points of termination and may include an explosion-proof, a dust-ignition-proof, or a flame-proof seal

13 / 15

Q13. In damp or wet locations, surface-type meter sockets shall be placed or equipped so as to prevent moisture or water from entering and accumulating within the cabinet or cutout box, and shall be mounted so there is at least ______ airspace between the enclosure and the wall or other supporting surface.

(A) 1 inch

(B) ½ inch

(D) ¼ inch

14 / 15

Q14. A concrete-encased electrode shall consist of at least 20 feet of:

(A) Bare copper conductor not smaller than 4 AWG

(B) Insulated copper conductor not smaller than 4 AWG

(D) Insulated copper conductor not smaller than 6 AWG

15 / 15

Q15. A 120/208v 3-phase panel with exposed live parts on one side, and no live or grounded parts on the other side of the working space, must have a minimum clear working distance of _______ in front of the panel.

(A) 4 feet

(B) 3 feet 6 inches

(D) 4 feet 6 inches

Your score is

Table of Contents

Journeyman Electrician Practice Test 2024

You’re probably already considering the Journeyman Electrician Practice Test, which is excellent! When you set out to complete the exam, ensuring you’ve taken at least a few practice tests is a good idea. These won’t have the exact questions you can expect on the test, but they will have plenty of information to help you understand what you need and why.

Journeyman Electrician Examination 2024

The journeyman electrician exam is conducted at the state level to ensure that the individual has developed the skills necessary to succeed as an electrician. This is a state-by-state exam designed to test your knowledge.

It will test your skills and abilities to ensure that you understand the code, the ability to wire and operate electrical equipment, and more. As the electrician, you must understand the code, the wiring, and the ability to install everything, ensuring they are safe. If they are not up to code, they will not meet building standards, which can cause headaches for your client.

The journeyman electrician test will include multiple-choice questions on various sections of the National Electrical Code and basic devices and equipment.

Test Name	Journeyman Electrician Exam
Administered By	Mostly your state Department of Safety and Professional Services.
Test mode	Online CBT
Question Types	multiple-choice questions
Exam Content	several different sections of the National Electrical Code
Total MCQs	80 to 100
Time Limit	3 to 4 hours
Cost	$50 to $150

.Journeyman Electrician Exam Content

Number of Questions 80
Time allowed (hours) 3
Subject Area # Quest.
General Electrical Theory & Principles 10
Wiring & Protection 16
Wiring Methods & Materials 16
Motors & Controls 10
Equipment for General Use 10
Special Occupancies 5
Special Equipment 5
Special Conditions 5
Communication Systems 3

Note: the above content may vary state-by-state basis.

Journeyman Electrician License

The journeyman electrician’s licensing exam is a great way to advance your career. However, it requires extensive studying. To be licensed as a journeyman electrician, you must first pass the licensing exam, which will require extensive studying.

The licensing exam will vary based on when you take it; the questions may differ for you from someone else. However, there are a few key subjects that you are likely to be tested on. These include understanding branch circuits and feeders, motors and motor controls, and more. There are many topics that you will need to have a full understanding of to be successful, and this book will cover the primary ones.

The electrician’s licensing exam will usually consist of multiple-choice questions, which you will also see throughout this book. As you read and practice for the exam as you go, you should develop the skills you’ll need to be successful. In this study guide, you will be presented with the topic, the skills you’ll need, and exams designed to test your understanding of the material.

Study Guide

When you go into your exam, there is a good chance you will be able to bring your NEC book. There are many different tables within it, all designed to keep you from having to memorize all the values. This reference sheet is invaluable as an electrician; you will be tested on it when you take the exam. By familiarizing yourself with the tables, you can test better.

American Electricians’ Handbook, 16th Edition. ISBN: 978-
0-07-149462-5. McGraw Hill Glencoe Order Services, P.O.
Box 545, Blacklick, OH 43004. Available at
www.amazon.com

Maine Electrician’s Laws and Rules. State of Maine
Department of Professional and Financial Regulation,
35 State House Station, Augusta, ME 04333. Avail at
http://www.maine.gov/pfr/professionallicensing/laws_rul
es.html

Mike Holt’s Illustrated Guide to Basic Electrical
Theory,. ISBN: 978-1932685121. Mike Holt
Enterprises, Inc., 7310 W. McNab Rd., Suite 201,
Tamarac, FL 33321. Avail at www.mikeholtbooks.com.

PERMITTED – NFPA 70 – National Electrical Code,
2017. ISBN: 9781455906727. National Fire Protection
Association, 1 Batterymarch Park, Quincy, MA 02169-
7471. Available at www.nfpa.org.

https://en.wikipedia.org/wiki/National_Electrical_Code