VTNE Laboratory Procedures Practice Test Questions Answers

Last Updated on March 8, 2025

VTNE Laboratory Procedures Practice Test Questions Answers 2025. Another group of questions on the VTNE involves laboratory procedures. These questions comprise 15 percent (30 items) of the questions on the exam. These questions test your knowledge of collecting specimens or samples, preparing samples for lab tests, performing the lab tests and procedures, and maintaining safety in the lab.

Laboratory procedure questions may ask you to identify the correct definition of a named procedure or select the proper use of a particular tool or equipment. You might have to determine a correct or incorrect statement among four choices. You may also encounter questions that describe a scenario and ask you how the technician in the description should proceed.

Some laboratory procedure questions focus on the microscope, one of the most commonly used equipment in veterinary laboratories. You may be asked about specific parts of a microscope (e.g., where a part is located or its function) or how to care for a microscope (e.g., how it is stored and cleaned).

VTNE Laboratory Procedures Practice Test

0%

0

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25

VTNE Laboratory Procedures Practice Test

VTNE Laboratory Procedures Practice Test
Total Questions - 25
Time Limit: N/A

To answer these types of questions, you have to rely on what you know about anatomy, bodily fluids, and common laboratory tests and procedures. You may be asked questions about the process of gathering specimens (e.g., drawing blood, collecting urine or feces, retrieving parasites, etc.) or you may be asked about the results of laboratory tests (e.g., what the sample would look like if it tested positive for the presence of a specific disease).

1 / 25

1) Which of the following is a common pre–analytical error in laboratory testing?

A) Incorrect storage temperature of specimens

B) Proper labeling of samples

C) Following standard operating procedures

D) Use of calibrated equipment

2 / 25

2) The proper procedure for disposing of sharps in the laboratory is to:

A) Bend the needles before disposal

B) Wash and store the needles for potential reuse

C) Recap needles immediately after use and place them in the regular trash

D) Dispose of needles in a designated sharps container without recapping

3 / 25

3) During a laboratory accident involving exposure to a toxic chemical, the technician should:

A) Immediately rinse the affected area with water for at least 15 minutes

B) Wait to see if symptoms develop before taking any action

C) Neutralize the chemical with a corresponding neutralizer without rinsing

D) Continue working and report the incident at the end of the day

4 / 25

4) Which of the following technicians is violating laboratory safety procedures?

A) Amanda accidentally ingests a biological agent and seeks the aid of the senior lab technician.

B) Bill uses small- and medium–sized containers instead of large containers to store chemicals.

C) Joseph wears a protective coat, disposable gloves, and goggles while working with chemical agents.

D) Tiffany breaks a beaker of toxic substances, cleans up the spill and broken glass, then returns to work.

5 / 25

5) In the context of urinalysis, the proper procedure for collecting a mid–stream urine sample from a canine patient is to:

A) Collect the sample after the urine has pooled on the floor

B) Collect the sample immediately at the start of urination

C) Catheterize the patient regardless of gender

D) Use a free–catch method after the patient has begun urinating

6 / 25

6) A postprandial urine sample would be taken after a period of:

A) rest

B) fasting

C) eating

D) activity

7 / 25

7) A gray and red Vacutainer tube contains:

A) silicone serum separation material

B) heparin

C) thrombin

D) silicone coating with no additive

8 / 25

8) Hemolysis is a form of cell disintegration in:

A) white blood cells

B) platelets

C) red blood cells

D) plasma

9 / 25

9) When storing biological samples for future testing, it is critical to:

A) Clearly label each sample with the date, time, and identification details

B) Store samples at room temperature to prevent freezing

C) Mix different samples together to conserve storage space

D) Label samples with only the animal’s species

10 / 25

10) When performing venipuncture on a cat using the left femoral vein, the patient should be placed in:

A) right lateral recumbency

B) dorsal recumbency

C) left lateral recumbency

D) sternal recumbency

11 / 25

11) A healthy feline should have a red blood cell count ranging from:

A) 5.5–10.0 × 10^6/mm³

B) 5.0–8.5 × 10^6/mm³

C) 7.0–13.0 × 10^6/mm³

D) 5.5–9.5 × 10^6/mm³

12 / 25

12) When using a centrifuge, which practice is essential for safety and sample integrity?

A) Balancing the tubes with an equal volume of sample in opposite buckets

B) Running only one tube per cycle

C) Operating at maximum speed regardless of sample type

D) Overfilling the tubes to ensure maximum yield

13 / 25

13) For cytology slide preparation, which of the following is the best practice?

A) Smearing a thick layer of sample on the slide

B) Air–drying the smear for 24 hours before staining

C) Ensuring a thin and even smear to allow proper cell examination

D) Covering the smear with a heavy liquid fixative immediately

14 / 25

14) A veterinarian collects a blood sample from a ferret to check the animal’s WBC count. This sample will provide information about the ferret’s:

A) white blood cells

B) whole blood culture

C) whole blood cells

D) white blood culture

15 / 25

15) Quality control samples in a laboratory are used primarily to:

A) Train new technicians

B) Expedite test processing during emergencies

C) Replace patient samples when insufficient volume is obtained

D) Monitor and ensure the accuracy of test results

16 / 25

16) When preparing reagents for a chemistry panel, it is essential to:

A) Store all reagents at room temperature regardless of instructions

B) Follow the manufacturer’s guidelines and use proper dilution techniques

C) Mix reagents in an unclean container to expedite the process

D) Combine reagents from different kits to reduce costs

17 / 25

17) The purpose of a Bunsen burner in a laboratory is primarily to:

A) Sterilize instruments through dry heat

B) Provide a controlled flame for heat–treating samples or melting reagents

C) Generate smoke for chemical reactions

D) Warm up laboratory reagents gradually

18 / 25

18) All the following are common anticoagulants except:

A) zeolite

B) EDTA

C) heparin

D) sodium citrate

19 / 25

19) When performing a fecal flotation test, it is important to:

A) Immediately examine the slide without any mixing

B) Use distilled water as the flotation solution

C) Mix the fecal sample with a solution of appropriate specific gravity

D) Use a high–speed centrifuge to concentrate parasite eggs

20 / 25

20) During a chemical spill in the laboratory, the technician should first:

A) Cover the spill with a cloth to prevent further spread

B) Notify the supervisor and evacuate the area if necessary

C) Immediately clean the spill without alerting others

D) Continue working if the spill appears minor

21 / 25

21) When using pipettes in the laboratory, which practice helps prevent cross–contamination?

A) Blowing out the contents to clean the tip for reuse

B) Wiping the outside of the pipette with a cloth between samples

C) Reusing the same pipette tip after rinsing with water

D) Using disposable pipette tips for each sample

22 / 25

22) Arthrocentesis is the method used to collect:

A) synovial fluid

B) cerebrospinal fluid

C) thoracic fluid

D) abdominal fluid

23 / 25

23) The majority of clinical waste disposal containers are which color?

A) Green

B) Red

C) Blue

D) Purple

24 / 25

24) Proper cleaning and maintenance of a compound microscope in the laboratory should include:

A) Removing the objective lenses for cleaning with soap and water

B) Using a lens cleaning solution and a microfiber cloth for the optics

C) Avoiding cleaning the eyepiece to preserve light intensity

D) Wiping the lenses with a paper towel

25 / 25

25) When preparing a blood smear for microscopic examination, the correct technique involves:

A) Immediately fixing the smear with methanol before stainingImmediately fixing the smear with methanol before staining

B) Spreading a drop of blood directly on the slide without a cover slip

C) Blotting the blood with filter paper to remove excess sample

D) Using a frosted slide to label the specimen and then air-drying the smear

Your score is
LinkedIn Facebook Twitter VKontakte

Similar Pages..

Domain-Wise VTNE Practice Test